Title |
Publisher |
Price |
The Tank Kit is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop's Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Victoria Miniatures... [click here for more] |
Tabletop Terrain |
$12.00
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe.
Shown with models from others sets: Door... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99
|
This is an expansion for the Alien Spaceships set and the Space Ships One set. It includes new tiles for alien spaceships as well as transition tiles between aliens and starship one so you can build an infected section of a starship.
Includes:
10 Alien Spaceship Tiles
4 Alien Eggs
4 Transition Tiles
4 Stasis Pods/Chambers... [click here for more] |
Fat Dragon Games |
$8.99
|
This is a set of 3 Stairs hollowed out 1 with a Arch, 1 with a closing door, and 1 with a floor and closing door.
the original Stairs can be found here https://www.drivethrurpg.com/product/166074/DRAGONLOCK-Ultimate-Dungeon-Starter-Set?manufacturers_id=346&filters=0_0_0_44593
The Door file can be found here https://www.drivethrurpg.com/product/248399/DRAGONLOCK-Ultimate-Tower-of-Terror?manufacturers_id=346&filters=0_0_0_44593_0... [click here for more] |
Fat Dragon Games |
$1.99
|
Asian Altars, Pillars, and Basins is a Fat Dragon Games Dragonbite Community Creator set with 17 brand new .stl files to add an oriental theme to your games.
The full list of files includes:
2x2 Asian Floor
2x2 Pool Tile (Asian and FDG Dungeon floors)
2x2 Spiral Dais (Asian and FDG Dungeon floors)
Dragon Pillars (Left and Right)
Dragon Basins (Left and Right)
Torii Shrine for Gong
Dragon... [click here for more] |
Fat Dragon Games |
$3.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
25 Miniatures! Customizable options for a 'Yuletime' house.
Snowflake carved sleigh!
Krampus! Present Golem! Santa Beholder and Santa Mind Flayer!
Evil Christmas trees, Gingerbread army, killer snowmen, nutcracker golems, mimic presents and Braindeer!
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing options, please contact... [click here for more] |
Dragon Workshop |
$20.00
|
Cyberpunk Hover Car is a collection of 3D printable files that build a detailed sci-fi hover/flying vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used as terrain for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, Fantasy... [click here for more] |
Tabletop Terrain |
$5.50
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Dungeon Treasure set that has all you need, but is recommended to pair with the Core Treasure Set for larger troves!
This set includes 62 unique tiles! With such a huge variety of floor and wall tiles, the possibilities are endless!
I recommend printing in .1... [click here for more] |
Fat Dragon Games |
$9.99
|
These are some modifications I made that go with the Tower of Terror set to allow round rooms in a dungeon that I thought people may like. They allow for a 20' wide corridor to join to a round room. The tower of terror main set will be needed to use these.
There are three STLs - They are all on a 4x4 tile, A left hand wall, a right hand wall and a double corridor wall.
I printed at 0.18 Layer... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are the following .stl models
2x2 Dungeon Floor - Skull Base 1 (Middle)
2x2 Dungeon Floor - Skull Base 2 (Corner)
Solo Water Pool
Solo Acid-Blood Pool
Solo Human Stew pool
2x2 Dungeon Floor - Hole Tile with Brace
Swappable Chest 1, Chest 2, Create, Keg, Sack, Tentacle, Tentacle 2, and Water
2x2 Dungeon Multi Wall Base
Multi Wall Shaft
Rotating Secret Wall with... [click here for more] |
Fat Dragon Games |
$19.99
|
The Halfling Holes are facades scaled for smaller 28mm scale miniatures ie halflings (which don't reach 28mm in height). Scale them up if you want them a more human height.
Add these facades to some foam, apply generous amounts of flock or cover in teddy bear fur from your local craft shop and you have a quick made halfling house.
This product contains 6 different front house facades, 1 caved in... [click here for more] |
Devious Games |
$5.00
|
* Please log into IMGUR to see the images below *
SET 08 - CR2032 Battery Chest
This printable 10-battery holder includes one chest base model with slots, and a lid.
Lid is set up supported and non-supported, four options:
Hollow (no supports, great for resin printers, angled prints or adding your own)
Supported, breakaway supports
Slots
Slots with a lockline to help bed adhesion.
Additional... [click here for more] |
Fat Dragon Games |
$3.00
|
Set contains:
6 miniatures
Three Nothic Miniatures
Witch Miniature with optional decorative base
Two Death Slaad Miniatures
Miniatures come with Resin Pre-supported options
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing options, please contact us directly. ... [click here for more] |
Dragon Workshop |
$5.00 $3.00
|
Modular Viking Longship system - Uses OpenLOCK clips to join segments. In-depth researched to bring to your printer a incredibly detailed viking longship. Accurate to miniature scale, with incredibly detailed wood grain and excellent accuracy to the source (except for the 1" grid ;-) )
Everything is aimed at maximum accuracy and 'playability' - Oars and benches slot in place- as does the decking,... [click here for more] |
Dragon Workshop |
$15.00 $9.00
|
Universal Truck is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Victoria Miniatures... [click here for more] |
Tabletop Terrain |
$5.80
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the... [click here for more] |
Fat Dragon Games |
$14.99
|
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames. This is the Barge Conversion set- 99 high quality STL files in OpenLOCK to allow you to create fully customizable barges for your ports and cities.
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing options, please contact us directly.... [click here for more] |
Dragon Workshop |
$10.00 $6.00
|
Lord Cireneg's City Facades will supply you with plenty of files to surround your tabletop transforming it from a measly little town into a sprawling metropolis. Adding these pieces to the outside of your gaming table really give it the effect of depth to your scenario.
You can use this to create residential areas, battlements and gatehouses.
See below for pictures of what you will receive.
... [click here for more] |
Devious Games |
$20.00
|
A small barracks also used as a storehouse. This sits against the walls of your castle wall or can be dousbled back on itself to create a standalone building. ... [click here for more] |
Devious Games |
$3.00
|
Included in this set of 3d printable terrain is the massive Cliffside community creator expansion for the Fat Dragon Games Dragonbite Terrain system. To make full use of this terrain you will want to have at least one of the following sets: Dungeon Starter, Cavern Starter, or Castle sets. Be sure to check out Fat Dragon Games for these sets. There are 58 stl models included in this release.
There... [click here for more] |
Fat Dragon Games |
$14.99
|
This is an add-on set for the Fat Dragon Games Tavern sets.
This set includes peg holes in both the classic and clip-on tavern walls as well as a dartboard, two shelves holding bottles and an empty shelf.
For Dragonbite clips, https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346&filters=0_0_0_44593_0 ... [click here for more] |
Fat Dragon Games |
$4.99
|
The Lord's Hall is a magnificent building that can be used as a centrepiece of your castle, town or city.
Pieces slot together with dovetail slots to create a tighly joined piece. It features an outer set of steps to lead up to a viewing gallery, An optional dais for the throne, banquet tables and chairs among other things. It also has the advantage of having the ability to have other buildings... [click here for more] |
Devious Games |
$10.00
|
If you are like me, then you love LED tiles and how they bring a dungeon to life! I am excited to introduce this series of LED Cavern Tiles. The set includes a variety of CORNERS and other exciting tiles. LED elements include crystals, lanterns, torches, and braziers. Check out the previews! If you are familiar with the FDG Torch Wall, then you will have no trouble with these. Enjoy!
This set is an... [click here for more] |
Fat Dragon Games |
$14.99
|
Shh! Did you hear that? I think there is something in that rubble over there!
Tremors in the Rubble contains 8 brand new tiles and 1 new loose debris for the Fat Dragon Games Dragonlock Dungeons. Each tile has a Before and After variant, so you can replace them when the players get close enough to attack (or make the perception check). Plenty of flat space to put treasure chests and other enticements,... [click here for more] |
Fat Dragon Games |
$2.00
|
Red Rocket stops were an iconic feature of pre-war life in the United States, evolving from simple gas filling stations to offer a wide range of services including fusion and coolant refilling services, following the widespread adoption of these technologies in 2066.
Strangely, this surviving example seems to have been preserved in its entirety, its roof and walls still standing as if untouched... [click here for more] |
Modiphius |
$20.00
|
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames. The modular dhow features over 130 high quality STL files for building a dhow to the length you want to sail the Asiatic and Arabian seas of your tabletop wargames or fantasy worlds.
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing... [click here for more] |
Dragon Workshop |
$15.00 $9.00
|
Once again, my friend, Lou Anders ask me to add a dwarven touch to some tiles. These tiles are remixes to be used with Fat Dragon Games Shadow Grove Sets. The set includes 3 single door and 4 double door dwarven hillside entrances. The dwarven elements used to make these tiles are from FDG Realm of the Mountain King set and Busy Little Dwarves Expo #1. The single door is from my dwarven tower.... [click here for more] |
Fat Dragon Games |
$4.99
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe. ... [click here for more] |
Fat Dragon Games |
$7.99
|
UNLEASH THE KRAKEN
A monstrous Kraken capable of enwrapping a ShipWorks ship! Modular kraken capable of swapping sections of the head out to customize the appearance of your kraken.
6 seperate tentacle designs- three attacking, a ship and mast grabbing tentacle, and a mini grabbing tentackle, as well as a 'legacy' tentacle from the initial Kickstarter art.
Also included, tactical map kraken... [click here for more] |
Dragon Workshop |
$8.00 $4.80
|
The Ruined Tower is a single piece ruined tower generic enough for many tabletop occassions. Great for non-descript scenarios asking for ruins. It has 2 rooms, a higher one affording lookout points and a lower one that can fit multiple party members or combatants. running between the two is a set of stairs running up to the higher tower from either side.
A set of fallen masonry is also included for... [click here for more] |
Devious Games |
$5.00
|
Constructed in the mid to late 2070s, Sanctuary Hills was a small suburb of the larger town of Concord, which was built on a small island reached by a wooden footbridge and made up of some 14 prefabricated homes. In the aftermath of the Great War, the conurbation was abandoned and became neglected with many of the homes collapsing due to the ravages of time and becoming nests for pests like radroaches... [click here for more] |
Modiphius |
$20.00
|
Lord Cireneg's City is a bustling city with buildings stacked side by side to create a true feeling of a metropolis of the medieval age, suited to your medieval or fantasy setting.
Expand the city with different separate purchases of The Battered Shield Inn, The Bell Tower and The Market Square. Among others!
More pieces will be added to this as time goes by including 30° street angles and corner... [click here for more] |
Devious Games |
$40.00
|
I am extremely excited to offer this set. Caverns is one of my most favorite places to take adventurers! I believe every great cavern needs water and now for the first time, modular waterfalls for our caverns are here!
Check out the previews, but a few things are worth noting. This set has over 80 tiles and growing. A few unique features are the 2x2 and 4x4 waterfalls that double as a riser to a second... [click here for more] |
Fat Dragon Games |
$14.99
|
This contains files as extras for The Wizard's Tower Bridge.
4 way junction
T Junction
2 tiered Bridge section
... [click here for more] |
Devious Games |
$5.00
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Cavern Treasure set that has all you need, but is recommended to pair with the Core Treasure Set for larger troves!
This set includes 62 unique tiles! With such a huge variety of floor and wall tiles, the possibilities are endless!
I recommend printing in .1... [click here for more] |
Fat Dragon Games |
$9.99
|
The Walls contains enough files so that you can buils your walls in a wide variety of ways with. Straight, with 45 or 90 degree turns either way. It also has an archway with either free standing iron or wooden gates.
Combine this with The wizard's Tower or the Wall Ruins for even more fun. ... [click here for more] |
Devious Games |
$4.00
|
A set of 7 4in and 7 2in wooden beams to clip on the outside edge of village houses, especially for between floors and under roofs.
Beams for outside and inside corners as well as various other configurations.
Requires supports under the clips so the edges are one floor thick. ... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls and floors. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. However, this set uses the original wavy-style water,... [click here for more] |
Fat Dragon Games |
$14.99
|
We are excited to expand the burrows set with the Ant Hive! This set includes 55 terrain models and 12 miniatures, all printable without supports! Miniatures include the Ant Queen, breeders, soldiers, and workers. The terrain includes all the typical walls and floors necessary to customize your own chambers but also includes predesigned 4x4 nursery chambers, food chambers, and waste chambers. The set... [click here for more] |
Fat Dragon Games |
$14.99
|
Included in this set are 17 Dragonbite floor and pillar tiles representing a particularly dank and disturbing dungeon. 12 2x2 inch variations, 4 2x2 Pillars and 1 4x4 tile. It has been a year since I first released the Catacombs floors, later rolled into the huge Catacombs 1 set. These new floors are based on user requests and tons of help from Thingiverse. Thank you to the many artists who published... [click here for more] |
Fat Dragon Games |
$7.99
|
Expand your burrows to include the dreaded spider's den! With over 80 models, including predesigned 4x4 chambers, webbed barriers, and unique environmental hazards, take your adventurers on an encounter they won't soon forget!
Preview here:
:lang="en">Burrows Spider Den
For best quality prints, use the FDG terrain profile at .2mm or better height. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99
|
This is a collection of five webs, a nest full of eggs and a previous spider victim that can connect to a wall via a peg.
*Note, this set contains no tiles, but the webs are designed to fit on any standard Fat Dragon Games classic wall tile. The spider victim can connect to any wall, or post, with a peg hole in it. ... [click here for more] |
Fat Dragon Games |
$1.99
|
A selection of clip on walls in the dwarven texture. Includes 17 models for clip on walls, with 3-4 variations of normal, short, and long walls. Also includes a number of 2x2 trimmed edge tiles.
This set would not have been possible without the ideas, input, pictures, constructive criticism, and generous test-printing by Tim Thorpe, co-artist. Thank you Tim. Also of great help was Aaron Mulder in... [click here for more] |
Fat Dragon Games |
$6.99
|
A remix of the FDG, the large tavern hearth is perfect for any large room that needs a fireplace. We've reworked the design to include a large, stone chimney. There is an open space at the top of the chimney to allow room for smoke, or other items, to be placed atop.
A firepit with three, removable basins for each stage of fire: sticks, fire, coals.
Please note that these are STL files only! You... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models... [click here for more] |
Fat Dragon Games |
$14.99
|
“The XVB02 ‘Vertibird’ is a VTOL ("Vertical Take Off and Landing") craft with an extremely durable armoured fuselage and can be armed with a variety of offensive weapons and defensive countermeasures. This is the most advanced aircraft of its kind ever developed, and the military hopes to press them into service by 2085.” - Museum of Technology Washington.
The Brotherhood of Steel make good... [click here for more] |
Modiphius |
$24.00
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
Includes gables and all walls.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20 ... [click here for more] |
Fat Dragon Games |
$2.99
|