| Title |
Publisher |
Price |
This set, Gelatinous Stool, is a hilarious take on a classic foe by our co-founder Colin Christenson. Colin has been working on amazing ideas for years, and is the creator of the Sky Islands campaign that makes up the horizon of the World of Aach'yn. When he announced he was working on a Sky Islands sewer, I mentioned to him that all who worked on them before had produced a "turd" asset for us to... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL terrain was built to expand the World of Aach'yn. It is a desolate and dangerous place; the cultist of Zol'Tigan are known for kidnapping stranglers on caravans and even straight from the major cities. The unwilling are sacrificed to bring forth the Demon Prince Zol'Tigan into the mortal plane, where he can grant evil wishes and summon undead armies from the victims. ... [click here for more] |
Aether Studios |
$16.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his tower... his tower... Let's just say you would only go there if you were very, VERY desperate to save someone... someone so important to you, that your own life was hardly a consideration. Because you'd surely be leaving it behind.... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable STL miniatures and terrain brings a Gnoll party to life. It includes a Gnoll Chief, Brute, and Scout, as well as their camp site. Two of the gnoll miniatures should be printed with supports, and the supports are built into the models -- simply remove them after printing.
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill:... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable STL miniatures and terrain brings an Orc tribe to life. It includes:
An Orc smith (two versions provided, with built-in supports for FDM and resin printers)
An Orc warrior
The Orc king's throne, with or without the king himself
An Orc hut
An Orc watchtower
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill: 10% recommended... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his cultists live only to serve him. Therefore, they must be able to gather and hold the "raw material" for these terrible ceremonies. The bone pits are where such unfortunates may be found.
This set includes both a scatter version... [click here for more] |
Aether Studios |
$4.00
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s... [click here for more] |
Aether Studios |
Pay What You Want
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn't want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This expansion allows for sewers of difference sizes, both half sized, double height, and 4x4 spaces. Will and Carl powered through all month to make... [click here for more] |
Aether Studios |
$10.00
|
This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life. We later released this as a patreon reward to our amazing... [click here for more] |
Aether Studios |
$1.00
|
This set, Dark Dungeon, is an expansion of Carl Csúrgó's Dark Manor Set featuring the art of Colin Christenson. Colin worked up a dungeon fit for a hunter of evil things, exactly what you would keep underneath a school of powerful misfits.
You do not need any of the previous Dark series sets to enjoy this title to the fullest. Though we do highly recommend them.
We hope you enjoy this set.... [click here for more] |
Aether Studios |
$11.00
|
This set, Dark Bakery, is a fusion of Carl Csúrgó's Dark Manor Series, and Colin Christenon's Aethertowne Buildings series, along with new sculpts from Nasos Maloudis and others. Specifically, these models were designed to work with each other for interchanging building levels with roofs. With these buildings you have infinite stacking options, with more to come each regularly from our team.
... [click here for more] |
Aether Studios |
$9.00
|
Check out our patreon where we publish our patron requests and other awesome sets like this one.
This set of terrain and scatter models features and evil technologically integated world akin to Event Horizon, the Hellscape of Doom, or the Cenobytes of Hellraiser. It's just plain evil. And its equipped for LED lights!
... [click here for more] |
Aether Studios |
$18.00
|
A full rework of the sand dunes is now complete thanks to Carl and Will. Over 80 of the finest dragonbite tiles ever sculpted for desert adventures.
Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible, but models will be less sturdy.
Top/Bottom Layers:... [click here for more] |
Aether Studios |
$17.00
|
Included in this set of 3d printable terrain you will find 19 .STL models for creating dwarven dungeons. This tile set features walls, doors, corners, and corner pillars needed to make rooms of any size that connect to each other with Dragonbite clips.
This set has 3 styles of terrain:
Resized Legacy tiles match our original sculpts, but as the name suggests they are all slightly resized to match... [click here for more] |
Aether Studios |
Pay What You Want
|
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 4 3d printable .STL files for your tabletop games.
TERRAIN Recommended Print Settings:... [click here for more] |
Aether Studios |
$5.00
|
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 25 3d printable .stl files for your tabletop games.
Recommended Print Settings:
Layer Size:... [click here for more] |
Aether Studios |
$6.00
|
This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them.
Recommended Print... [click here for more] |
Aether Studios |
$1.00
|
Create elaborate hedge mazes with these 3D-printable STL files. This Hedge Mazes set includes walls, posts, corners, arches, and a gate paired with both a natural ground style and a Herringbone style brick floor that you might find in the Hedge Maze behind a Lord's manor.
These tiles are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$1.00
|
This set of 3D printable terrain augments the Konga Rising terrain with a new set piece -- a large 6x6" sacrificial rock. There are versions with a DragonbiteTM base and without (in case you want to lay it on top of existing terrain), as well as a bonus 6x6" dirt tile.
NOTE: your printer must have at least a 6"x6" print area to print these pieces!
Recommended Print Settings:... [click here for more] |
Aether Studios |
$4.00
|
Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own.
See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$2.00
|
The Alien Lair Core Set is the main building block set of the Alien Lair series. Included in this set are the walls, corners, curve walls, and other models needed to make full, diverse alien lair dungeons. The origins of this set go back to 2017 when Colin Christenson released the Alien Space Ship set on the Dragonbite Community Creator. That set featured exceptionally clean and beautiful lines, so... [click here for more] |
Aether Studios |
$4.79 $1.00
|
Aether Studios' Nasos Maloudis brings us this amazing Hive Queen to match the new Alien Lair terrain. This 100mm mini prints completely supportless. You can find more terrain in this series right here!
RECOMMENDED PRINT SETTINGS
● Layer Size: 0.15mm recommended, 0.1mm for smoother features
● Infill: 20% Minimum
● Top/Bottom Layers: 6 (or 0.9mm if using a different... [click here for more] |
Aether Studios |
$3.00
|
Aether Studios' Nasos Maloudis brings the hive into its next evolution with this fantastic expansion of 3d printable stl format scatter models for your Alien Lair! These models are so terrifying and inhuman that you are guaranteed to stoke the worst fears of your players. You will find 13 models included in this set for 3d printing. This set was available to the patrons of Aether Studios in October... [click here for more] |
Aether Studios |
$7.00
|
Aether Studios' Nasos Maloudis brings the latest to the Tycho Series with a terrifying expansion of 15 3d printable stl format Dragonbite compatible tiles for your Alien Lair! These tiles will not fail to fill your players with fear!
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended.
Top/Bottom... [click here for more] |
Aether Studios |
$8.00
|
Seraphim is our “Greco Roman Marble/Granite” style terrain for temple style dungeons and structures. It is built on top of the Dragonbite base with a 1 inch grid for interoperability with other tile-sets. Every 2x2 tile has space for LEDs using our LED Slot. This core set includes all the basics you need to get started building a classic marble temple. Floors, Walls, Corners, Stairs, – everything... [click here for more] |
Aether Studios |
$3.19 $1.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes pillars, pools, secret... [click here for more] |
Aether Studios |
$7.99 $1.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes walls, corners, and corridors... [click here for more] |
Aether Studios |
$11.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes several styles of decorative... [click here for more] |
Aether Studios |
$5.00
|
Modern Urban Terrain is a collaborative series from Ben Gayer, Will Walker, Nasos Maloudis, and the Patrons of Aether Studios. Nasos Maloludis sculpted these miniatures upon request. Most zombies are simple rotters, we wanted some zombies where they had personality and backstories for the modern era. we hope you feel we accomplished this with success in this first publication.
These minis are designed... [click here for more] |
Aether Studios |
$5.00
|
This village, it’s evil! Evil I tells ya, just look around and you’ll see… EEEEEVIL!
This set, Evil Village, is the work of Will Walker, Carl Csúrgó, and Nasos Maloudis. For many months we worked up new models for this set. We’ve done a lot of horror, so we felt a little confidant that we could finally do this set the justice we felt it deserved. Inside this set you will find over 100 .stl... [click here for more] |
Aether Studios |
$14.00
|
Aztlan 2 Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 awesome models in it has now been expanded. Aztlan 2: Reforged is a 111 model mega set with room and corridor options in abundance. The Cat Den wall was a big favorite... [click here for more] |
Aether Studios |
$4.00
|
Aztlan 3: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 35 expansion models in it has now exploded in size. Aztlan 3: Reforged is a 107 model mega set with room and corridor options in abundance. This set allows... [click here for more] |
Aether Studios |
$2.00
|
Aztlan 4: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 31 expansion models in it has now exploded in size. Aztlan 4: Reforged is a 103 model mega set with a vast array of new models. This set allows you to build... [click here for more] |
Aether Studios |
$4.00
|
Aztlan 5: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 temple models has increased in size and quality. Aztlan 5: Reforged is now a 59 model set updated with requests. With these models you can build out huge... [click here for more] |
Aether Studios |
$2.00
|
Aztlan 6: Swamped is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we decided to kickstarter it with requests by our many fans and patrons. We've packed this set full of terrain - over 120 models of .STL printable files. To get the full utility of this set, we recommend you have the Aztlan 1 and Aztlan 4 or Aztlan Starter... [click here for more] |
Aether Studios |
$10.00
|
Aztlan 7: Traps is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we decided to kickstart up it with requests by our many fans and patrons. We've packed this set full of terrain - over 330 models of .STL printable files. To get the full utility of this set, we recommend you have the Aztlan 1 and Aztlan 4 or Aztlan Starter... [click here for more] |
Aether Studios |
$15.00
|
Aztlan Awakens Miniatures features all of the core and a few of the stretch goal rewards from our 2nd Kickstarter. This set features 3-4 poses each of the "Brave Souls Three" our band of heroes, plus many azite snakefolk and other threats they encounter during the adventure. There are 32 miniatures in .stl format for 3d printing. Also included are 15 miniatures bases for your own personal needs. All... [click here for more] |
Aether Studios |
$16.00
|
Aztlan was our first original set that got developed into a full series. It was Will's baby to start, but almost all the Aether Staff have since contributed. It is also our largest tileset series, with well over 1000 models.
This latest expansion, Epic Foes, was built almost entirely by Nasos Maloudis as user requested miniatures from the Aztlan Awakens Kickstarter. These minis were the ones specifically... [click here for more] |
Aether Studios |
$10.00
|
Included in this set of 3d printable terrain you will find 59 .stl files for creating a diverse dockyard village for your town. All models clip together with dragonbite clips for expandability.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm... [click here for more] |
Aether Studios |
$15.00
|
Included in this set of 3D-printable STL models from Nasos Maloudis is a massive Dragon, Xy Gamus the Ash Wyrm of the High Zafiri Wilds. The elders of High Zafiri learned long ago to pay whatever reasonable tribute was asked of the Great Dragon. Xy Gamus has several nests in the wilds from cliffside locations to a desert oasis.
This model is large with 250mm x 216mm x 170mm dimensions. It is easily... [click here for more] |
Aether Studios |
$8.00
|
This set of 3D-printable STL terrain is an expansion of the core Dwarven Holds set for those Dwarves who appreciate, well, the ale-ier things in life. Bigger, ale-ier things. It may not be obvious at first glance, but that’s a regular-size anvil next to the cask in the thumbnail below, which means it holds about as much ale as a Storm Giant. And it’s not just any ale! The Tartalan Clan are... [click here for more] |
Aether Studios |
$2.00
|
This set of 3D-printable STL terrain is an expansion of the core Dwarven Holds set, introducing pageantry and royalty. The high walls, doors, and columns, altars, banners, statues, and thrones make for massive and impressive throne rooms, in true Dwarven style.
Include a giant tealight-compatible brazier.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$10.00
|
Fantasy Villages: Mothsilk Glade is a 3D-printable natural terrain tileset by Aether Studios. Fantasy Villages was the launch series for our patrons. We routinely expand it with new sets for our beloved patrons. This latest expansion includes 100 models of intricately detailed terrain and includes everything you need to build a woodland hamlet. This set of terrain is compatible with all... [click here for more] |
Aether Studios |
$25.00
|
This set provides a small gravekeeper's shack that is perfect for any graveyard. Includes furniture as well as a wheelbarrow with shovel and dirt inserts. Also comes with a pre-decorated building for ease of printing.
Recommended Print Settings:
● Layer Size: 0.1mm recommended
● Infill: 10% for all models recommended, 25% for Secret Door Base Tiles
● Top/Bottom Layers: 9 (or 0.9mm... [click here for more] |
Aether Studios |
$5.00
|
This FREE set of miniatures contains 20 models of our Gremlin Warband. These models are available both Presupported for Resin Machines and unsupported for your own supports. The Gremlins of Aach’yn are nasty little buggers. The natural enemies of the Dwarves with whom they compete for techno-magical mastery. They can be found all over the world and the Sky Islands beyond in settlements, workshops,... [click here for more] |
Aether Studios |
Pay What You Want
|
Is it that time of year already? Thrill your players with this Spooktacular set of 3D-printable terrain, including a crypt, numerous graves and gravestones, and a pumpkin patch -- including the Great Pumpkin himself! This set includes more than 40 STLs in all, compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$10.31
|
This set of 3D-printable STL terrain is the first expansion to our line of terrain built around a dual purpose of scatter and tile in one package. The models are designed to fit the floors of the Into the Feywild: Juve’s Verdant set, but are also very useful as scatter on their own. These fantastic terrain models will let you take your players into the the feywild, where life grows unhindered. The... [click here for more] |
Aether Studios |
$6.00
|
This set of 3D-printable terrain, Into the Feywild: Juve’s Verdant, is the start of a brand new line of terrain built with scatter and tiles in one package. These 50+ fantastic STL models will let you take your players into the the feywild, where life grows unhindered. The peg style ground tiles let you build an outdoor scene while the terrain features can also be used as scatter on non-peg tiles.... [click here for more] |
Aether Studios |
$11.99 $11.00
|
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set, Lily Wetlands, was built specifically to blend with our existing published Dockyards titles. It contains 39 2x2 and 4x4 tiles on top of Dragonbite bases. Additional printing advice is available in the included ReadMe.
RECOMMENDED PRINT SETTINGS
● Layer Size:... [click here for more] |
Aether Studios |
$15.00
|
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes 10 Azite Warriors miniatures from our first kickstarter. The set includes all of the miniatures models shown below and more. All miniatures print without supports. Additional information and resources can be found in the ReadMe.
RECOMMENDED PRINT SETTINGS
● Layer Size: 0.1mm... [click here for more] |
Aether Studios |
$15.00
|
Log In 
