Close
Close
Advanced Search

Tower of Terror Extension WallsClick to magnify

Tower of Terror Extension Walls

ADD TO WISHLIST >

These files require the DragonLock Tower of Terror set. This is a remix and expansion to the Tower of Terror. These files allow you to create a level without a floor to make a level double high. There are also pieces with stairs mounted to the walls, so you can have stairs go up through the level without a floor. There are 4 wall pieces in this set. The pieces with stairs require supports when printed

1 - TWS - Tower Wall with Stairs
2 - TWES - Tower Wall Extension with Stairs
3 - TWE - Tower Wall Extension
4 - TWEW - Tower Wall with Windows Extension
5 - TW -Tower Wall with DragonLock holes added to the sides

These files were designed to use 4-40 X 1/4" Binder Hear Machine Screws and magnets that are 3/16" dia. x 1/10" thick. For the magnets Google search for "magnet d3h1".

Tower Level Sample

Tower Level without floor

NOTE: The floors and ground level walls without stairs shown in the pictures are from the Tower of Terror set and NOT included in this package. 

Supports

I used the following settings on my supports.

  • Touching Build Plate
  • Support Overhand Angle 80
  • Support Pattern Sig Zag
  • Support Density 10
  • Support Line Distance Apart 4.0
  • Support Z Distance 0.1
  • Support Top Distance 0.1
  • Support X/Y Distance 1.0

I think one of the mist important is the Support Overhang Angle. This sets up my slicer so it only adds a support if the angle of the part is greater than 80 degrees. The Z distance and X/Y distance is how far the supports are from the model. I found that having the X distance at 0.1 the parts do not “attach” to the support, but it creates enough support top create the horizontal piece. The X/Z distance of 1 keep the supports away from the model.

Update 10/9/2018

I have updated the above pieces to use the DragonLock clips between the walls.

1 - TWESDL - Tower Wall Extension with Stairs REV 05 DragonLock
2 - TWEDL - Tower Wall Extension REV 05 DragonLock
3 - TWEWDL - Tower Wall with Windows Extension REV 05 DragonLock

Tower Level Sample Dragonlock on sides

Update 10/11/2018

Updated the two DragonLock Stair pieces with Wooden Stairs instead of stone. (both stone and wood starts are in the set)

1 - TWESWDL-Tower Wall Extension with Wooden Stairs REV 05 B DrgonLock
2 - TWSWDL-Tower Wall with Wooden Stairs REV 05 B DrgonLock

Tower Level Sample Wooden Stairs

Update 02/23/2020

Some users were having issues with the extension walls when using skirts. It appears the bottoms were not 100% flat. I trimmed less than 0.01" off the bottom of the extension walls, I believe this will fix the issue. 

Update 11/03/2020

I had a request for a base wall with the DragonLock Clip Holes on the sides. TWDL has been added to the set. 

I updated the ZIP to version 09. The only change was I added one file "TWDL-Tower_Wall REV 05 B DragonLock.stl"

The Fine Print

This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.

This work contains material that is copyright Fat Dragon Games and/or other authors. Such material is used with permission under the Community Content Agreement for Dragonbite Community Creator.

All other original material in this work is copyright 2018 by Robert Schrempp and published under the Community Content Agreement for Dragonbite Community Creator.

Terms & Conditions for products by Fat Dragon Games can be viewed HERE. 

pixel_trans.gif
 
 More from this Title's Contributors
pixel_trans.gif
 
 Customers Who Bought this Title also Purchased
pixel_trans.gif
pixel_trans.gif
Reviews (1)
Discussions (5)
Customer avatar
Bob S November 03, 2020 11:53 pm UTC
CREATOR
I updated the ZIP to version 09. The only change was I added one file "TWDL-Tower_Wall REV 05 B DragonLock.stl". I put this file up so you do not have to get the entire zip file.
Customer avatar
Jeff S February 16, 2020 10:38 pm UTC
PURCHASER
Bob,
I have printed a lot of the original tower of terror, and purchased this a few days ago to go with it. However, it looks like the walls don't line up with what I have. I'm wondering if perhaps your stuff was meant to work with a version out of sync with the original set I printed? Is there any chance you have a version of this that will work with the original tower of terror models? I would love to incorporate the stair walls in particular, but they don't seem to fit with all the stuff I've already printed.
Reply
Customer avatar
Bob S February 17, 2020 3:56 am UTC
CREATOR
I do not understand the error you have. When you say they do not work with the original files, I do not know what you mean. I am still rather new to DriveThru, is there a way for you to private message me or post an image so I can understand the problem.

Bob
Reply
Customer avatar
Jeff S February 17, 2020 1:02 pm UTC
PURCHASER
Hello, and thanks for your response! I couldn't find a way to private message, but we could perhaps try email? My address is jeffsullins at gmail.
Reply
Customer avatar
Jeff S February 17, 2020 4:14 pm UTC
PURCHASER
After taking another look, I may be in error -- let me try again. Might be a mistake on my part.
Reply
Customer avatar
Bob S February 17, 2020 4:27 pm UTC
CREATOR
I will wait to hear from you.


Bob
Reply
Customer avatar
Jeff S February 18, 2020 1:49 am UTC
PURCHASER
Confirmed: it was my mistake. There's no problem with the models. Thanks, and sorry to bother you.
Reply
Customer avatar
Bob S February 18, 2020 3:40 pm UTC
CREATOR
NO problem.


Bob
Customer avatar
Mr G J R July 21, 2019 6:30 pm UTC
PURCHASER
it would be great if you could remove the bottom step from

1 - TWESWDL-Tower Wall Extension with Wooden Stairs REV 05 B DrgonLock
2 - TWSWDL-Tower Wall with Wooden Stairs REV 05 B DrgonLock

so they couldbe used with floor tiles

cheers
Reply
Customer avatar
Bob S July 28, 2019 3:59 pm UTC
CREATOR
I am not 100% sure what you want me to change and why. The "TWSWDL-Tower Wall with Wooden Stairs REV 05 B DrgonLock" is designed to work with the tower floor.

"TWESWDL-Tower Wall Extension with Wooden Stairs REV 05 B DrgonLock" is used to make a taller tower without a floor in the middle.

What floor tiles are you wanting to use these with.
Reply
Customer avatar
Mr G J R July 29, 2019 2:54 pm UTC
PURCHASER
Id like to be able to slide both existing the castle floor and wooden floor underneath the steps , without having to use the floor tile with the cut away slot.

so basically the bottom stair rests onthe floor.
Reply
Customer avatar
Bob S July 29, 2019 7:35 pm UTC
CREATOR
The stairs do not extend below the level of the floor, I think I am missing something.

TWSWDL-Tower Wall with Wooden Stairs REV 05 B DrgonLock is designed to have a tower floor in it.

TWESWDL-Tower Wall Extension with Wooden Stairs REV 05 B DrgonLock is designed to sit on top of TWSWDL-Tower Wall with Wooden Stairs and continue the stairs up without a floor. This is used to make a tall room with a spiral stair around the inside.

When you read the "top" you can use a floor with a cutout, or a floor with a track door, or even a solid floor.
Reply
Customer avatar
Mr G J R July 30, 2019 12:01 am UTC
PURCHASER
yes but I was asking if there is any chance of of a modified one because I would get more use oout of the parts if I could aslo use both parts from a slodi floor so I could have a stair case start from a wood or stone floor with just the narrow spiral steps.
Reply
Customer avatar
Bob S February 17, 2020 4:10 am UTC
CREATOR
I still do not understand, there are two different parts, one is designed to have a floor in it, the other is an extension that does not take a floor, but extends the wall up.

TWSWDL-Tower_Wall with Wooden Stairs REV 05 B DrgonLock
This one takes a tower floor under the bottom stair.

TWESWDL-Tower_Wall Extension With Wooden Stairs REV 05 B DrgonLock
This is an extension to the wall and does not take a floor under it.


Bob
Customer avatar
Bob S October 27, 2018 4:18 pm UTC
CREATOR
Sorry for the delay, I am not in this system often, just got your message. I am making a new zip REV 07, will upload it in just a few minutes. There are no changes to the files from REV 06 to REV 07. REV 06 zip had a couple corrupted files.

Here is the list of file included in the ZIP file.

Tower Level without floor 00.png
Tower of Terror Extension Walls.jpg
Tower Wall Extensions Read Me.pdf
Tower Wall Stairs Sample.png
Tower Wall Stairs Window Sample.png
TWEDL-Tower_Wall Extension REV 05 B DrgonLock.stl
TWESDL-Tower_Wall Extension with Stairs REV 05 B DrgonLock.stl
TWES-Tower Wall Extension with Stairs REV 04 Magnets.stl
TWESWDL-Tower_Wall Extension With Wooden Stairs REV 05 B DrgonLock.stl
TWE-Tower Wall Extension REV 04 Magnets.stl
TWEWDL-Tower_Wall Extension with Windows REV 05 B DrgonLock.stl
TWEW-Tower_Wall Extension with Windowsn REV 04 Magnets.stl
TWSAShort-Tower_Wall Stairs Adaptor REV 05 Shorter.stl...See more
Customer avatar
Richard S October 16, 2018 5:18 pm UTC
PURCHASER
Bob,
The "Tower_Wall_Extensions_REV_06.zip" is corrupt per Z-Zip and Winrar both. Can you please fix the file and upload it again?
- Rich
Reply
Customer avatar
Bob S October 27, 2018 4:21 pm UTC
CREATOR
New ZIP is uploading now.
Reply
Customer avatar
Richard S November 01, 2018 1:45 pm UTC
PURCHASER
Thanks Bob!
Narrow Results
$ to $
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!















Product Information
Silver seller
Community Content
Author(s)
Artist(s)
Format
Original electronic Click for more information
Scanned image
These products were created by scanning an original printed edition. Most older books are in scanned image format because original digital layout files never existed or were no longer available from the publisher.

For PDF download editions, each page has been run through Optical Character Recognition (OCR) software to attempt to decipher the printed text. The result of this OCR process is placed invisibly behind the picture of each scanned page, to allow for text searching. However, any text in a given book set on a graphical background or in handwritten fonts would most likely not be picked up by the OCR software, and is therefore not searchable. Also, a few larger books may be resampled to fit into the system, and may not have this searchable text background.

For printed books, we have performed high-resolution scans of an original hardcopy of the book. We essentially digitally re-master the book. Unfortunately, the resulting quality of these books is not as high. It's the problem of making a copy of a copy. The text is fine for reading, but illustration work starts to run dark, pixellating and/or losing shades of grey. Moiré patterns may develop in photos. We mark clearly which print titles come from scanned image books so that you can make an informed purchase decision about the quality of what you will receive.
pixel_trans.gif
Original electronic format
These ebooks were created from the original electronic layout files, and therefore are fully text searchable. Also, their file size tends to be smaller than scanned image books. Most newer books are in the original electronic format. Both download and print editions of such books should be high quality.
File Last Updated:
November 03, 2020
This title was added to our catalog on October 03, 2018.